{"title":"Motorhome accessories","description":"","products":[{"product_id":"prickstop-aufkleber","title":"Prickstop sticker for burglary protection","description":"3 pcs. Prickstop stickers to reorder. Dimensions 80x25mm.\u003cbr\u003e\u003cbr\u003eThe stickers are made of high-quality automotive film from Oracal. Matt laminated, \u003cstrong\u003eUV and weather resistant\u003c\/strong\u003e. Normal stickers weather after a short time and become pale and brittle. These stickers last up to 7 years in outdoor use.\u003cbr\u003e\u003cbr\u003eIf you have already installed \u003ca href=\"https:\/\/prickstop.com\/shop\/prickstop-einbruchschutz\/\"\u003ePrick Stop\u003c\/a\u003e, but are still looking for suitable stickers as a deterrent, you can purchase the stickers separately here.\u003cbr\u003e\u003cbr\u003eThe set contains 3 pieces. One for the driver's door and one for the rear door. The third is intended as a spare. However, you can also apply it to the passenger door, in which case the suspected burglar will not have to walk around the car and will hopefully look for another target.\u003cbr\u003e\u003cbr\u003eThe stickers are applied to the sheet metal or to the outside of the window. The back of the Prickstop stickers is adhesive, i.e. you cannot stick these stickers to the window from the inside.\u003cbr\u003e\u003cbr\u003eThe stickers are \u003cstrong\u003epermanently adhesive\u003c\/strong\u003e, but with an adhesive strength that allows them to be removed easily.\u003cbr\u003e\u003cbr\u003eThe stickers are easier to apply because the adhesive effect only sets in after a delay. This means you can align the Prick Stop stickers at your leisure.\u003cbr\u003e\u003cbr\u003eStickers are included when you order the \u003ca href=\"https:\/\/prickstop.com\/shop\/prickstop-einbruchschutz\/\"\u003ePrick Stop burglary protection\u003c\/a\u003e or the \u003ca href=\"https:\/\/prickstop.com\/shop\/set\/\"\u003eburglary protection economy set for motorhomes\u003c\/a\u003e from us.","brand":"Prickstop.com","offers":[{"title":"Black","offer_id":51948327764235,"sku":"PSSTB1","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":51948327797003,"sku":"PSSTW1","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/prickstop-aufkleber-fur-einbruchschutz-8104299.jpg?v=1773223883"},{"product_id":"aushebelwerkzeug-fur-turverkleidung-und-clips-4-teilig","title":"Trim removal tool set for door panels and clips (4-piece)","description":"\u003cp\u003e\n    With this practical \u003cstrong\u003etrim removal tool set\u003c\/strong\u003e, you can remove door panels, clips and interior parts \u003cstrong\u003esafely and without damage\u003c\/strong\u003e – ideal for installing Prickstop protection plates or for similar work on vehicle doors.\n\u003c\/p\u003e\n\u003cp\u003e\n    Made from durable yet slightly flexible \u003cstrong\u003ePP plastic\u003c\/strong\u003e, the tools allow precise work without leaving scratches or pressure marks. The set includes \u003cstrong\u003efour differently shaped\u003c\/strong\u003e levers that make it easy to remove clips, trim strips, radio and dashboard panels as well as plastic covers.\n\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\n    Benefits\n\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eGentle removal of door clips and trim parts\u003c\/li\u003e\n    \u003cli\u003eIdeal for installing Prickstop protection plates\u003c\/li\u003e\n    \u003cli\u003eDurable, long-lasting PP material\u003c\/li\u003e\n    \u003cli\u003eUniversally usable for many vehicle types\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\n    Package contents\n\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e4-piece plastic trim removal tool set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\n    Technical data\n\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e Trim removal tool set (4-piece)\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e PP plastic\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eUse:\u003c\/strong\u003e Interior \/ removal of trim panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\n    Quick summary\n\u003c\/h2\u003e\n\u003cul\u003e\n    \u003cli\u003eGentle and precise – without damage\u003c\/li\u003e\n    \u003cli\u003eFour shapes for different clips and trim parts\u003c\/li\u003e\n    \u003cli\u003ePractical tool for installation and retrofit work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\n    FAQs\n\u003c\/h2\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the trim removal tool set best suited for?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\n    For removing door panels, clips, trim strips and interior parts – e.g. when installing Prickstop protection plates or speakers.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWill the tools damage surfaces?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\n    The tools are made of PP plastic and are designed to remove trim parts as gently as possible. As with any lever tool, careful use is still recommended.\n\u003c\/p\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003ch3\u003e\n    Safety and usage notes\n\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eUse the tools only as intended for removing trim panels, clips and interior parts.\u003c\/li\u003e\n    \u003cli\u003eLever carefully: excessive force can damage trim parts, clips or paintwork.\u003c\/li\u003e\n    \u003cli\u003eKeep away from children – not a toy. Risk of injury if the tool slips.\u003c\/li\u003e\n    \u003cli\u003eWhen working on the vehicle, wear protective gloves if necessary and ensure stable footing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\n    Manufacturer information\n\u003c\/h3\u003e\n\u003cp\u003e\n    \u003cstrong\u003eManufacturer \/ distributor:\u003c\/strong\u003e\u003cbr\u003eJactio e.U.\n\u003c\/p\u003e\n\u003cp\u003e\n    \u003cstrong\u003eAddress:\u003c\/strong\u003e\u003cbr\u003eAmalienstraße 2\/3\u003cbr\u003e1130 Vienna\u003cbr\u003eAustria\n\u003c\/p\u003e\n\u003cp\u003e\n    \u003cstrong\u003eEmail:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"mailto:shop@prickstop.com\"\u003eshop@prickstop.com\u003c\/a\u003e\n\u003c\/p\u003e","brand":"Prickstop.com","offers":[{"title":"Default Title","offer_id":52521061351691,"sku":"TRS5","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/aushebelwerkzeug-fur-turverkleidung-und-clips-4-teilig-3557005.png?v=1773223884"},{"product_id":"3gas-square-gasalarm-12-v-fur-wohnmobil-camper-caravan","title":"3GAS+ Square gas alarm - 12 V gas detector for motorhomes, campers \u0026 caravans","description":"\u003cp\u003eThe \u003cstrong\u003e3GAS+ Square (K50001)\u003c\/strong\u003e is a compact, professional \u003cstrong\u003e12 V\/24 V gas alarm\u003c\/strong\u003e for motorhomes, campervans, caravans and boats.\u003cbr\u003eIt was specially developed for mobile use and provides reliable protection against \u003cstrong\u003eliquefied gases and narcotic gases\u003c\/strong\u003e in the vehicle interior.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore safety when sleeping, traveling and staying overnight - for adults, children and pets.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy a gas alarm in a motorhome makes sense\u003c\/h2\u003e\n\u003cp\u003eLeaking gas pipes, defective appliances or loose connections can cause dangerous gas concentrations to build up unnoticed. This poses a considerable risk, especially at night.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e3GAS+ Square\u003c\/strong\u003e continuously monitors the ambient air and provides an early warning before gases become a danger.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich gases does the 3GAS+ Square detect?\u003c\/h2\u003e\n\u003ch3\u003eWithout an additional sensor, the 3GAS+ Square detects\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePropane\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ebutane\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEther \/ VOCs (narcotic gases)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese gases can be explosive or - in the case of certain VOCs - have an anaesthetic effect in high concentrations.\u003c\/p\u003e\n\u003ch3\u003e⚠️ Carbon monoxide (CO)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon monoxide is only detected in conjunction with the optional CO sensor (K50003).\u003c\/strong\u003e\u003cbr\u003eThe \u003cstrong\u003e3GAS+ Square (K50001) alone is not a CO detector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eModularly expandable - ideal for campers \u0026amp; larger vehicles\u003c\/h2\u003e\n\u003cp\u003eThe big advantage of the \u003cstrong\u003e3GAS+\u003c\/strong\u003e Square is its \u003cstrong\u003emodular sensor system\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra sensor (K50002)\u003c\/strong\u003e\u003cbr\u003eAdditional gas monitoring at another position in the vehicle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra CO sensor (K50003)\u003c\/strong\u003e\u003cbr\u003eNecessary for \u003cstrong\u003edetecting carbon monoxide (CO)\u003c\/strong\u003e, e.g. in gas heaters, boilers or in the sleeping area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor \u003cstrong\u003eoptimum gas monitoring\u003c\/strong\u003e, it is recommended to \u003cstrong\u003ework with two sensors\u003c\/strong\u003e (base unit + additional sensor).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation \u0026amp; mounting recommendation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnection to the vehicle's \u003cstrong\u003e12 V or 24 V on-board voltage\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003e3GAS+ Square\u003c\/strong\u003e should be mounted approx. \u003cstrong\u003e30 cm above the ground\u003c\/strong\u003e \u003cbr\u003e(ideal for sinking gases such as propane and butane)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended installation with additional sensor:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase unit:\u003c\/strong\u003e approx. \u003cstrong\u003e30 cm above the floor\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional additional sensor:\u003c\/strong\u003e\u003cbr\u003eAt least \u003cstrong\u003e1.5 m above the floor\u003c\/strong\u003e and approx. \u003cstrong\u003e20 cm below the ceiling\u003c\/strong\u003e\u003cbr\u003e(ideal for rising gases)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis combination ensures particularly reliable gas monitoring throughout the entire interior.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eFunction test \u0026amp; maintenance\u003c\/h2\u003e\n\u003cp\u003eTo ensure fault-free operation, the ambient air must \u003cstrong\u003enot contain any environmentally harmful gases\u003c\/strong\u003e.\u003cbr\u003eThe functionality should be \u003cstrong\u003echecked regularly\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow to test the gas alarm:\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSwitch on the device and wait for the self-test\u003c\/li\u003e\n\u003cli\u003eThe \u003cstrong\u003egreen LED\u003c\/strong\u003e lights up continuously → Device ready for operation\u003c\/li\u003e\n\u003cli\u003eHold a \u003cstrong\u003egas lighter without a flame\u003c\/strong\u003e to the side of the openings\u003c\/li\u003e\n\u003cli\u003eAfter a few seconds, the \u003cstrong\u003e40-second pre-alarm\u003c\/strong\u003estarts\u003c\/li\u003e\n\u003cli\u003eIf gas continues to enter, the \u003cstrong\u003econtinuous alarm\u003c\/strong\u003efollows\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAs soon as there is no more gas concentration, the device automatically switches back to standby.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 3GAS+ Square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e K50001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8719326011141\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating voltage:\u003c\/strong\u003e 12 V \/ 24 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 53 × 53 × 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Indoor, continuous operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSuitable for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMotorhomes \u0026amp; campervans\u003c\/li\u003e\n\u003cli\u003ecaravans\u003c\/li\u003e\n\u003cli\u003eboats\u003c\/li\u003e\n\u003cli\u003eVehicles with gas heating, gas stove or gas installation\u003c\/li\u003e\n\u003cli\u003eUsers looking for an \u003cstrong\u003eexpandable gas alarm\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBriefly summarized\u003c\/h2\u003e\n\u003cp\u003e✔ Detects propane, butane \u0026amp; narcotic gases\u003c\/p\u003e\n\u003cp\u003e✔ Very compact \u0026amp; modern design\u003c\/p\u003e\n\u003cp\u003e✔ Expandable with additional \u0026amp; CO sensor\u003c\/p\u003e\n\u003cp\u003e✔ Suitable for 12 V \u0026amp; 24 V\u003c\/p\u003e\n\u003cp\u003e❌ \u003cstrong\u003eCO detection only with optional CO sensor\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFAQs about the 3GAS+ Square\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the 3GAS+ Square detect carbon monoxide (CO)?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The 3GAS+ Square (K50001) only detects carbon monoxide in conjunction with the optional additional CO sensor (K50003). Without a CO sensor, it is not a CO detector.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich gases does the 3GAS+ Square detect without an additional sensor?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWithout an additional sensor, the 3GAS+ Square detects propane, butane and volatile organic compounds (VOCs) such as ether (often referred to colloquially as \"sleeping gas\").\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere should the gas alarm be installed in the motorhome?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWe recommend approx. 30 cm above the floor (for sinking gases such as propane\/butane). For optimum monitoring, we recommend using a second sensor that is mounted at least 1.5 m above the floor and approx. 20 cm below the ceiling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow can I test the function of the gas alarm?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eSwitch on the device and wait until the green LED lights up continuously after the self-test. Then let gas from a lighter flow into the openings at the side (only gas, no flame). After a few seconds, the 40-second pre-alarm starts; if more gas enters, the continuous alarm will sound.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eFor which vehicles is the 3GAS+ Square suitable?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 3GAS+ Square is suitable for motorhomes, campervans, caravans and boats with a 12 V or 24 V on-board power supply, especially if there is an existing gas installation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003ch3\u003eManufacturer information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003cbr\u003eKAMAR Elektronik (3GAS+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e\u003cbr\u003e3GAS+ Square gas alarm - item no. K50001\u003cbr\u003eEAN: 8719326011141\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eThe detection of \u003cstrong\u003ecarbon monoxide (CO)\u003c\/strong\u003e is \u003cstrong\u003eonly\u003c\/strong\u003e possible \u003cstrong\u003ein conjunction with the optional CO sensor (K50003)\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Prickstop.com","offers":[{"title":"Default Title","offer_id":52850349998347,"sku":"3GasK50001","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/3gas-square-gasalarm-12-v-gasmelder-fur-wohnmobil-camper-caravan-4156024.jpg?v=1773223869"},{"product_id":"3gas-extra-sensor-zusatzsensor-fur-gasalarm-k50002","title":"3GAS+ Extra Sensor - Additional sensor for gas alarm (K50002)","description":"\u003cp\u003eThe \u003cstrong\u003e3GAS+ Extra Sensor (K50002)\u003c\/strong\u003e is an optional \u003cstrong\u003eadditional sensor\u003c\/strong\u003e for the 3GAS+ alarm system and is used to \u003cstrong\u003eextend gas monitoring\u003c\/strong\u003e in the vehicle interior. It is operated exclusively in combination with a 3GAS+ base unit and enables an additional measuring position in the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal for larger motorhomes, campervans, caravans or vehicles with separate areas.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat is the 3GAS+ Extra sensor used for?\u003c\/h2\u003e\n\u003cp\u003eGases behave differently depending on their type: some sink to the ground, others rise to the top. It is therefore not always possible to optimally monitor all areas of a vehicle with just one measuring position.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e3GAS+ Extra Sensor\u003c\/strong\u003e supplements the basic unit with an additional measuring point and thus improves the \u003cstrong\u003eearly detection of dangerous gas concentrations\u003c\/strong\u003e in the entire passenger compartment.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich gases does the Extra Sensor detect?\u003c\/h2\u003e\n\u003cp\u003eIn conjunction with the 3GAS+ base unit, the Extra Sensor detects\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003ePropane\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ebutane\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEther \/ VOCs (narcotic gases)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The Extra Sensor K50002 is \u003cstrong\u003enot a CO sensor\u003c\/strong\u003e and \u003cstrong\u003edoes not detect carbon monoxide (CO)\u003c\/strong\u003e. The separate \u003cstrong\u003eCO sensor K50003\u003c\/strong\u003e is required for CO detection.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRecommended mounting position\u003c\/h2\u003e\n\u003cp\u003eThe Extra Sensor is typically installed \u003cstrong\u003ein the upper area of the vehicle\u003c\/strong\u003e and thus complements the base unit installed close to the ground.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt least \u003cstrong\u003e1.5 m above the floor\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eApprox. \u003cstrong\u003e20 cm below the ceiling\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis position is particularly suitable for detecting \u003cstrong\u003erising gases\u003c\/strong\u003e and, in combination with the base unit, ensures comprehensive gas monitoring.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eIntegration into the 3GAS+ system\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperation \u003cstrong\u003eonly in conjunction with a 3GAS+ base unit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eAutomatic integration into the existing alarm system\u003c\/li\u003e\n\u003cli\u003eAlarms are triggered via the base unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor optimum use of the 3GAS+ system, it is generally recommended to work \u003cstrong\u003ewith at least two sensors\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e 3GAS+ Extra Sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e K50002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8719326011158\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 27 × 27 × 22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Interior\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSuitable for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMotorhomes \u0026amp; campervans\u003c\/li\u003e\n\u003cli\u003ecaravans\u003c\/li\u003e\n\u003cli\u003eboats\u003c\/li\u003e\n\u003cli\u003eVehicles with several zones or sleeping areas\u003c\/li\u003e\n\u003cli\u003eUsers who want to \u003cstrong\u003especifically extend\u003c\/strong\u003e their gas alarm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBriefly summarized\u003c\/h2\u003e\n\u003cp\u003e✔ Adds an additional measuring position to the 3GAS+ gas alarm\u003c\/p\u003e\n\u003cp\u003e✔ Detects propane, butane \u0026amp; narcotic gases (VOCs)\u003c\/p\u003e\n\u003cp\u003e✔ Very compact \u0026amp; unobtrusive\u003c\/p\u003e\n\u003cp\u003e✔ Ideal for larger vehicles\u003c\/p\u003e\n\u003cp\u003e❌ \u003cstrong\u003eNo CO detection (separate CO sensor required)\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFAQs about the 3GAS+ Extra Sensor (K50002)\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the Extra Sensor also work without a base unit?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The 3GAS+ Extra Sensor (K50002) is an additional sensor and can only be operated in conjunction with a 3GAS+ base unit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the Extra Sensor detect carbon monoxide (CO)?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The Extra Sensor does not detect carbon monoxide. The separate CO sensor K50003 is required for CO detection.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere should the Extra Sensor be installed?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eIdeally, the Extra Sensor should be installed in the upper area of the vehicle, at least 1.5 m above the floor and approx. 20 cm below the ceiling.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen is an additional sensor useful?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eAn additional sensor is particularly useful for larger vehicles, separate sleeping areas or if comprehensive gas monitoring is required.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003ch3\u003eManufacturer information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003cbr\u003eKAMAR Elektronik (3GAS+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e\u003cbr\u003e3GAS+ Extra Sensor - Item no. K50002\u003cbr\u003eEAN: 8719326011158\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eThe Extra Sensor \u003cstrong\u003edoes not detect carbon monoxide (CO)\u003c\/strong\u003e. The optional \u003cstrong\u003eCO sensor K50003\u003c\/strong\u003e is required for CO detection.\u003c\/p\u003e","brand":"Prickstop.com","offers":[{"title":"Default Title","offer_id":52850370609419,"sku":"3GasK50002","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/3gas-extra-sensor-zusatzsensor-fur-gasalarm-k50002-6315785.png?v=1773223869"},{"product_id":"3gas-kohlenmonoxid-zusatzsensor-fur-gasalarm-k50003","title":"3GAS+ CO sensor - Additional carbon monoxide sensor for gas alarm (K50003)","description":"\u003cp\u003eThe \u003cstrong\u003e3GAS+ CO sensor (K50003)\u003c\/strong\u003e is a special \u003cstrong\u003eadditional carbon monoxide sensor\u003c\/strong\u003e for the 3GAS+ alarm system. It is used for the \u003cstrong\u003etargeted detection of carbon monoxide (CO)\u003c\/strong\u003e in the vehicle interior and is operated exclusively in conjunction with a 3GAS+ base unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndispensable for vehicles with gas heating, boilers or combustion systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat is the 3GAS+ CO sensor used for?\u003c\/h2\u003e\n\u003cp\u003eCarbon monoxide (CO) is a \u003cstrong\u003ecolorless and odorless gas\u003c\/strong\u003e that can be life-threatening even in low concentrations. It is produced by incomplete combustion in gas heaters, boilers or stoves, among other things.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e3GAS+ CO sensor\u003c\/strong\u003e supplements the 3GAS+ system with \u003cstrong\u003ededicated CO monitoring\u003c\/strong\u003e and thus ensures a significantly higher level of safety in the motorhome or camper.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhich gases does the CO sensor detect?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCarbon monoxide (CO)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The K50003 CO sensor \u003cstrong\u003eonly\u003c\/strong\u003e detects \u003cstrong\u003ecarbon monoxide\u003c\/strong\u003e. To detect propane, butane or narcotic gases, the \u003cstrong\u003ebasic unit\u003c\/strong\u003e or the \u003cstrong\u003eextra sensor K50002\u003c\/strong\u003e are required.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eRecommended installation position\u003c\/h2\u003e\n\u003cp\u003eThe CO sensor is ideally installed \u003cstrong\u003ein the upper area of the vehicle\u003c\/strong\u003e, as carbon monoxide is evenly distributed in the ambient air.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAt least \u003cstrong\u003e1.5 m above the floor\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eApprox. \u003cstrong\u003e20 cm below the ceiling\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eParticularly suitable in \u003cstrong\u003ethe sleeping area\u003c\/strong\u003e or near the \u003cstrong\u003egas heater\/boiler\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis position enables reliable and early detection of carbon monoxide.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eIntegration into the 3GAS+ system\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperation \u003cstrong\u003eonly in conjunction with a 3GAS+ base unit\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eSpecialized sensor exclusively for CO\u003c\/li\u003e\n\u003cli\u003eAlarm is triggered via the base unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor comprehensive safety, we recommend operating the 3GAS+ system with \u003cstrong\u003ebase unit + extra sensor + CO sensor\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eTechnical data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e 3GAS+ CO sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem number:\u003c\/strong\u003e K50003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8719326011134\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 27 × 27 × 22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Interior\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSuitable for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMotorhomes \u0026amp; campervans\u003c\/li\u003e\n\u003cli\u003ecaravans\u003c\/li\u003e\n\u003cli\u003eboats\u003c\/li\u003e\n\u003cli\u003eVehicles with gas heating, boilers or combustion systems\u003c\/li\u003e\n\u003cli\u003eUsers who want \u003cstrong\u003etargeted CO monitoring\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eBriefly summarized\u003c\/h2\u003e\n\u003cp\u003e✔ Only detects carbon monoxide (CO)\u003c\/p\u003e\n\u003cp\u003e✔ Adds CO protection to the 3GAS+ system\u003c\/p\u003e\n\u003cp\u003e✔ Very compact \u0026amp; unobtrusive\u003c\/p\u003e\n\u003cp\u003e✔ Ideal for sleeping areas \u0026amp; heating\u003c\/p\u003e\n\u003cp\u003e❌ \u003cstrong\u003eNo gas or VOC sensor\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFAQs about the 3GAS+ CO sensor (K50003)\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the CO sensor also work without a base unit?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The 3GAS+ CO sensor (K50003) is an additional sensor and can only be operated in conjunction with a 3GAS+ base unit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDoes the CO sensor also detect propane or butane?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. The CO sensor only detects carbon monoxide (CO). The base unit or the K50002 extra sensor are required to detect propane, butane or anaesthetic gases.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhere should the CO sensor be installed?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eWe recommend installing it in the upper area of the vehicle, at least 1.5 m above the floor and approx. 20 cm below the ceiling, ideally in the sleeping area or near the gas heater.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhen is a CO sensor particularly important?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA CO sensor is particularly important in vehicles with gas heating, boilers or other combustion systems, as carbon monoxide is colorless and odorless.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003ch3\u003eManufacturer information\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003cbr\u003eKAMAR Elektronik (3GAS+)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e\u003cbr\u003e3GAS+ CO sensor - item no. K50003\u003cbr\u003eEAN: 8719326011134\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eThe CO sensor \u003cstrong\u003eonly\u003c\/strong\u003e detects \u003cstrong\u003ecarbon monoxide (CO)\u003c\/strong\u003e and \u003cstrong\u003edoes not replace a gas alarm\u003c\/strong\u003e for propane or butane.\u003c\/p\u003e","brand":"Prickstop.com","offers":[{"title":"Default Title","offer_id":52850373918987,"sku":"3GasK50003","price":33.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/3gas-co-sensor-kohlenmonoxid-zusatzsensor-fur-gasalarm-k50003-1532218.png?v=1773223868"},{"product_id":"fiat-ducato-seitenleisten-clips-aussen-zierleiste-5-stuck-oe-71728806-856543-kopie","title":"Fiat Ducato side strip clips (exterior trim strip) - 5 pieces | OE 71728806 \/ 856543","description":"\u003cp\u003e\u003c\/p\u003e\n\u003cp data-end=\"968\" data-start=\"701\"\u003eThese clips are used to \u003cstrong data-end=\"774\" data-start=\"724\"\u003eattach the exterior side protection \/ trim strip\u003c\/strong\u003e (rub strip \/ side molding) - \u003cstrong data-end=\"824\" data-start=\"815\"\u003enot\u003c\/strong\u003e for the interior door trim. \u003cspan data-state=\"closed\"\u003e\u003c\/span\u003e\u003cbr data-end=\"895\" data-start=\"892\"\u003eIdeal as a small supply in case a clip breaks when removing the strip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1171\" data-start=\"1007\"\u003e\n\u003cstrong data-end=\"1052\" data-start=\"1007\"\u003eFor exterior rub strip \/ side molding\u003c\/strong\u003e: Fixing clips for the exterior side molding (not interior door trim). \u003cspan data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-end=\"1277\" data-start=\"1174\"\u003e\n\u003cstrong data-end=\"1189\" data-start=\"1174\"\u003eSet of 5\u003c\/strong\u003e: Typically sufficient if a few clips break or are missing during removal.\u003c\/li\u003e\n\u003cli data-end=\"1377\" data-start=\"1280\"\u003e\n\u003cstrong data-end=\"1297\" data-start=\"1280\"\u003eOE references\u003c\/strong\u003e: 71728806 \/ 856543 (for comparison only). \u003cspan data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-end=\"1515\" data-start=\"1380\"\u003e\n\u003cstrong data-end=\"1395\" data-start=\"1380\"\u003eSuitable for\u003c\/strong\u003e: Fiat Ducato, Peugeot Boxer, Citroën Jumper (depending on year of manufacture\/variant). \u003cspan data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-end=\"1728\" data-start=\"1518\"\u003e\n\u003cstrong data-end=\"1549\" data-start=\"1518\"\u003ePlease be sure to compare\u003c\/strong\u003e: Before ordering, compare the \u003cstrong data-end=\"1583\" data-start=\"1566\"\u003eshape and dimensions\u003c\/strong\u003e with the removed original clip (photos\/hole dimensions\/clip head). Many vehicles have different fasteners depending on the year of manufacture\/strip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1009\" data-start=\"988\"\u003eScope of delivery: 5 clips\u003c\/p\u003e","brand":"Prickstop.com","offers":[{"title":"Default Title","offer_id":53093540397323,"sku":"CSD","price":7.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/files\/fiat-ducato-clip-set-tuerpaneel-und-seitenleiste-3x5-stueck-4871051.png?v=1778056457"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/2510\/4139\/collections\/wohnmobil-zubehor-3966282.jpg?v=1773223822","url":"https:\/\/www.prickstop.com\/en-eur\/collections\/motorhome-accessories.oembed","provider":"Prickstop.com","version":"1.0","type":"link"}